We independently review everything we recommend. When you buy through our links, we may earn a commission. Learn more›

30mm Fine Tooth Hole Saw for Acrylic Bath of 2026 for Clean Cuts

Get clean, chip-free plumbing cutouts with the top 30mm fine tooth hole saw for acrylic bath options of November 2026 reviewed for acrylic tub installations.

Lhazemu 1-3/16"(30mm) HSS Bi-Metal Hole Cutter with Pilot Drill Bit, Hole Saw for Wood, Plastic, Drywall, Metal Sheet

Rough tear-out and cracked gelcoat turn a simple bathroom upgrade into an expensive headache in seconds. Drilling plumbing penetrations through delicate acrylic requires steady feed pressure and the right cutting edge so the plastic does not melt, grab, or shatter around the rim. Using a 30mm Fine Tooth Hole Saw For Acrylic Bath provides the controlled kerf and high tooth count needed to slice clean circular openings without binding against brittle material. When pairing your drill with clean fastening accessories, having dedicated hole cutters ensures every plumbing fitting sits flush against the tub wall.

Standard bi-metal teeth with aggressive pitch often catch on fragile composite walls, kicking the drill back and scratching pristine acrylic finishes. That is why many plumbers and DIY remodelers prefer specialized carbide-tipped or fine-grit diamond hole cutters that shave material incrementally rather than chewing through it. Our review of manufacturer specifications, pilot bit concentricity, and arbor designs helps identify reliable options that keep heat down and cutting accuracy high. Investing in a proper 30mm fine tooth hole saw for acrylic bath saves you from costly tub replacements while delivering factory-smooth edges on every install.

Award Product TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›
Lhazemu 1-3/16 Inch (30mm) Lhazemu 1-3/16 Inch (30mm) 8.0/10 Buy
Best Value Mollom 30mm 1-3/16 Inch M42 Cobalt Bi-Metal Hole Mollom 30mm 1-3/16 Inch M42 Cobalt Bi-Metal Hole 7.8/10 Buy
Best Premium YEUTTYX 1-3/16-Inch (30mm) YEUTTYX 1-3/16-Inch (30mm) 8.1/10 Buy
DaduoRi 1-3/16 Inch Diamond Hole Saw with Pilot DaduoRi 1-3/16 Inch Diamond Hole Saw with Pilot 8.0/10 Buy
Luomorgo 1-3/16" (30mm) TCT Carbide Hole Saw Luomorgo 1-3/16" (30mm) TCT Carbide Hole Saw 8.1/10 Buy
Best Overall Luomorgo 1-3/16" (30mm) Carbide Hole Saw Cutter Luomorgo 1-3/16" (30mm) Carbide Hole Saw Cutter 9.1/10 Buy
Best Budget Luomorgo 30mm (1-3/16 Inch) Luomorgo 30mm (1-3/16 Inch) 8.8/10 Buy
1
Lhazemu 1-3/16 Inch (30mm)

Lhazemu 1-3/16 Inch (30mm)

Lhazemu · 8.0/10 TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›

The Lhazemu 1-3/16 inch bi-metal hole cutter provides a ready-to-drill setup equipped with an arbor, two pilot bits, and an automatic slug-ejection spring. It offers practical cutting performance for plumbers, electricians, and DIYers drilling clean 30mm penetrations through sheet metal, wood, and drywall.

Pros

  • Complete package includes an arbor, replacement pilot drill bit, hex key, and plug ejection spring
  • HSS bi-metal teeth cut both wood products and non-ferrous or thin ferrous sheet metals
  • Spring-loaded pilot design reduces the hassle of manually prying cut slugs out of the cup
  • Cost-effective solution for dedicated single-size plumbing and electrical boring tasks

Cons

  • Cylinder depth is optimized for panel goods and thin sheet materials rather than deep timber boring
  • Cutting thin stainless or iron requires strict drill speed management to prevent tooth overheating
  • Arbor uses a standard set screw that requires periodic tightening with the hex key during repeated cuts
2
Mollom 30mm 1-3/16 Inch M42 Cobalt Bi-Metal Hole
Best Value

Mollom 30mm 1-3/16 Inch M42 Cobalt Bi-Metal Hole

Mollom · 7.8/10 TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›

This Mollom 30mm (1-3/16-inch) bi-metal hole saw combines M42 high-speed steel with 8% cobalt to deliver smooth, durable cutting across wood, drywall, plastics, and thin metal. It offers solid value for DIYers, remodelers, and electricians who need an arbor-ready cutting tool with built-in slug ejection.

Pros

  • M42 bi-metal tooth composition with 8% cobalt withstands heat better than entry-level carbon steel hole cutters
  • Comes complete with an arbor, two titanium-plated pilot drill bits, and an ejection spring ready out of the box
  • 1-1/2-inch cutting depth allows full pass-through on nominal 2x lumber without having to chisel out layers
  • Variable tooth spacing helps suppress cutting chatter and reduces workpiece binding

Cons

  • Not engineered for cutting structural steel plate, thick stainless steel, or masonry materials
  • Round 3/8-inch shank requires a traditional drill chuck and cannot directly fit 1/4-inch hex impact drivers without an adapter chuck
  • Deep cuts in dense hardwoods require periodic clearing of wood chips to avoid heat buildup
3
YEUTTYX 1-3/16-Inch (30mm)
Best Premium

YEUTTYX 1-3/16-Inch (30mm)

YEUTTYX · 8.1/10 TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›

The YEUTTYX 1-3/16-inch (30mm) hole saw pairs hardened M42 bi-metal teeth with a spring-loaded pilot arbor for smooth boring through wood, drywall, and plastic. It offers a practical, budget-conscious cutting solution for electricians, plumbers, and DIY remodelers running small conduit or pipe rough-ins.

Pros

  • Hardened M42 bi-metal teeth rated at 65 HRC withstand repeated boring through wood and thin metals.
  • Ejection spring on the center drill bit assists in pushing the cut plug out of the cup.
  • 45mm cup height clears standard 2x dimensional lumber without bottoming out prematurely.
  • Supplied with a hex shank arbor, two center drill bits, and an adjustment wrench in the package.

Cons

  • Fixed 1-3/16-inch (30mm) diameter limits application to specific pipe, conduit, and hardware dimensions.
  • Arbor uses a standard set-screw mechanism with an Allen wrench rather than a quick-change release collar.
  • Not suited for drilling thick structural steel, reinforced masonry, or hard stone surfaces.
4
DaduoRi 1-3/16 Inch Diamond Hole Saw with Pilot

DaduoRi 1-3/16 Inch Diamond Hole Saw with Pilot

DaduoRi · 8.0/10 TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›

This 1-3/16-inch (30mm) diamond hole saw features a center pilot bit and a 3/8-inch triangle shank designed for controlled wet drilling through porcelain tile, granite, marble, and glass. It offers an affordable, practical hole-cutting solution for remodelers, plumbers, and DIYers setting pipe penetrations and shower valves.

Pros

  • Integrated pilot bit guides initial penetration and minimizes surface wander on polished porcelain or glass
  • Standard 3/8-inch triangle shank ensures secure clamping in common three-jaw drill chucks without slipping
  • Substantial 1-3/8-inch cutting depth clears standard tile, stone pavers, or slab countertops
  • Budget-friendly price point for single-job bathroom remodels, plumbing rough-ins, or DIY renovations

Cons

  • Requires continuous water lubrication to prevent thermal breakdown of the diamond bond
  • Center pilot bit creates an initial pilot hole, which may not be ideal for chip-sensitive glass work
  • Core slug removal may require manual clearing through the barrel after deep cuts
5
Luomorgo 1-3/16" (30mm) TCT Carbide Hole Saw

Luomorgo 1-3/16" (30mm) TCT Carbide Hole Saw

Luomorgo · 8.1/10 TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›

The Luomorgo 30mm (1-3/16-inch) TCT Carbide Hole Saw uses a stepped three-blade tooth design to deliver clean cylindrical cuts through sheet metal, stainless steel plate, and wood. It is an affordable, practical hole cutter for electricians, metal fabricators, and DIYers using standard handheld drills or drill presses.

Pros

  • TCT carbide teeth provide enhanced wear resistance over standard bi-metal hole saws when drilling tough metals like stainless steel
  • Three-blade stepped tooth profile helps distribute cutting force evenly across the kerf to reduce grab and chatter
  • Includes two replacement titanium-coated pilot center bits and an adjustment hex wrench in the package
  • Compact 30mm (1-3/16-inch) diameter is practical for electrical knockouts, automotive fabrication, and plumbing pass-throughs

Cons

  • Shallow cup depth limits through-cutting to sheet materials and thin plate rather than thick structural lumber
  • Requires steady drill feed pressure and proper cutting lubricant to prevent tooth chipping or pilot bit overheating in thick steel
  • Cut slugs can become tightly wedged inside the cup if drilling fibrous wood or gummy plastics without clearing chips frequently
6
Luomorgo 1-3/16" (30mm) Carbide Hole Saw Cutter
Best Overall

Luomorgo 1-3/16" (30mm) Carbide Hole Saw Cutter

Luomorgo · 9.1/10 TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›

The Luomorgo 1-3/16-inch (30mm) Carbide Hole Saw delivers clean, accurate round cuts in stainless steel, sheet metal, and FRP up to 1/5-inch thick. It is a practical, budget-conscious cutting accessory for electricians, metalworkers, and DIYers installing 30mm pushbuttons or running thin conduit.

Pros

  • Carbide-tipped teeth resist heat and wear better than traditional high-speed steel bimetal cups on tough metals
  • Accurate 1-3/16-inch (30mm) bore size, ideal for standard industrial pushbuttons and electrical pass-throughs
  • Capable of cutting a wide range of ferrous and non-ferrous materials, including stainless steel and cast iron
  • Smooth cutting performance on thin materials up to 1/5-inch thick with good concentric stability

Cons

  • Limited maximum material cutting depth of 1/5 inch prevents deep boring through thick dimensional lumber or structural timbers
  • Requires steady drill feed pressure and proper cutting lubricant to avoid overheating the carbide teeth in stainless steel
  • Carbide tips can fracture if side-loaded, dropped, or operated at excessively high drill speeds
7
Luomorgo 30mm (1-3/16 Inch)
Best Budget

Luomorgo 30mm (1-3/16 Inch)

Luomorgo · 8.8/10 TGH Score About TGH ScoreThe TGH Score is our own rating from 0 to 10, based on performance, design and build, ease of use, and value. It reflects independent research and is never influenced by manufacturers, retailers, or affiliate commissions. Learn more ›

The Luomorgo 30mm Diamond Hole Saw 2-pack provides an economical solution for boring clean 1-3/16-inch holes through tile, glass, ceramic, and light stone. Featuring a nickel-plated iron alloy body and side chip clearance slots, it suits DIY homeowners and tile remodelers tackling plumbing feed-throughs or fixture installs.

Pros

  • Standard 0.39-inch (10mm) shank fits standard 3/8-inch and 1/2-inch drill chucks without specialty adapters
  • Large side evacuation slots help clear waste cores quickly between cuts
  • Nickel-plated finish helps resist rust and surface corrosion during wet drilling operations
  • Budget-friendly two-piece pack provides an immediate spare for multi-hole tiling jobs

Cons

  • Lacks a center pilot bit, requiring a template, guide jig, or steady hand-starting at an angle to prevent walking
  • Maximum cutting depth is limited to 1.14 inches, preventing single-pass drilling through thicker masonry slabs
  • Requires continuous water lubrication during cutting to prevent diamond coating burnout and premature wear

Frequently Asked Questions

Can you use a standard wood hole saw on an acrylic tub?

No, standard wood hole saws have aggressive, coarse teeth that easily snag and crack brittle acrylic. Coarse teeth bite too deeply into plastic, which generates excessive heat and causes catastrophic chipping along the rim. A dedicated 30mm fine tooth hole saw for acrylic bath or fine-grit diamond hole cutter grinds away material smoothly to keep the tub surface pristine. Running your drill with light forward pressure and high tooth count blades ensures clean edges without binding.

What drill speed works best when cutting acrylic with a 30mm hole saw?

Low drill speeds between 400 and 600 RPM deliver the cleanest results without melting the acrylic. High rotational speeds generate friction that softens thermoplastic material, gumming up the saw teeth and binding the arbor. Applying painter’s tape over the cutting layout also prevents surface scuffing while maintaining line-of-sight visibility. Maintaining moderate speeds similar to techniques used with clean cut metal tools keeps operating temperatures well below the plastic melting threshold.

Why do some 30mm hole cutters feature an ejection spring on the pilot bit?

The ejection spring automatically pushes the cut plastic plug out of the cylinder right after breakthrough. Plastic slugs tend to expand slightly from frictional heat, jamming tightly inside the cup of the hole saw. Having an active spring on the pilot bit saves time by eliminating the need to pry melted discs out with a screwdriver between cuts.

Is a diamond grit hole saw better than a fine-tooth bi-metal saw for acrylic tubs?

Diamond grit hole saws offer smoother finishes on reinforced acrylic composite tubs with fiberglass backings. While fine-tooth bi-metal saws cut faster, diamond abrasive edges eliminate tooth snagging entirely and leave zero micro-fractures in the gelcoat. Applying water as a lubricant when using diamond cutters helps flush out slurry and prolongs cutting tool life.

What shank size is standard for a 30mm hole saw arbor?

Most 30mm hole cutters utilize a standard 3/8-inch hex or triangular shank compatible with common drill chucks. This size fits virtually all 1/2-inch and 3/8-inch corded or cordless drills without slipping under torque. Ensuring your drill chuck grips the flats tightly prevents wobble and runout, much like setting up a rigid fence on precision workshop equipment to guarantee true, square cuts.

About the author

Sal Vaglica
Sal Vaglica

Sal Vaglica is an experienced tools and home-improvement writer with a background as a hardwood flooring contractor. He has covered tools, DIY projects, technology, and home-improvement products since 2006 and favors hands-on testing that recreates the situations consumers are likely to encounter at home. His approach focuses on practical performance and useful buying guidance rather than specifications alone.